JET 6' x 48' Belt & 12' Disc Sander, Open Stand, 1-1/2 HP, 115/230V 1Ph (JSG-6DCK)

The JET JSG-6DC Sander combines a 12' disc and a 6' x 48' belt to provide raw industrial 1.5-HP sanding power. The exclusive dual thumbscrew belt tracking adjustment locks to keep the belt on track while tackling any tough application. The sander boasts both a quick-release belt tension lever and a quick-lock dust cover for the disc.Jet's disk-and-belt-sander combination brings professional-quality sanding to any shop setting. Set on an open steel stand, both tools run off a center-balanced, fully encased induction motor that's prewired for 115-volt outlets. The 1-1/2 horsepower motor delivers plenty of power for most loads and applications. We appreciate the convenience of a single 4-inch dust chute that comes pretty close to meeting the manufacturer's claim of collecting 95% of removed material. The 6-by-48-inch belt sander cycles at 2,500 sfpm and can be adjusted to operate both vertically and horizontally, and the cast-iron, miter-slotted table tilts to accommodate almost any sanding application. Unique thumbscrews make tracking adjustments quick, easy, and fairly consistent. The Jet sports a graphite platen to reduce heat and help increase belt life. The 12-inch disk sander removes material quickly with little vibration and, like the belt sander, features a pivoting cast-iron table with a miter slot. Both tables have positive stops at 45 and 90 degrees. We appreciate the pad-lockable start button that comes standard on all big Jet tools and prevents accidental start-up and unauthorized use. --Justin PaulHorizontally, vertically, and any angle in between--that's where you'll be sanding with this combination sander. The 1-1/2 hp, single phase, 115/230-volt motor is prewired for 115 volts and produces 2,500 sfpm. Both precision-ground cast-iron tables have miter gauge slots and positive stops at 45 and 90 degrees. Belt table measures 12-1/2 by 7 inches while the disc table measures 16-1/2 by 10 inches. The belt guard is designed to allow full use of the belt length, and belt tracking adjustments are easily made with exclusive dual thumb screws. A 4-inch dust port base efficiently collects the majority of dust produced by both sanders before it becomes airborne. Your belt sander purchase includes a back stop for horizontal mode, miter gauge, sanding belt, and disc. FEATURES
STANDARD EQUIPMENT
SPECIFICATIONS
Sanding Belt (WxL/in): 6 x 48
Disc (Dia/in): 12
Belt Table Tilt (Down, Up): 45 degrees, 20 degrees
Disc Table Tilt: 45 degrees, 25 degrees
Motor: 1 1/2 HP, 1 Ph 115/230V Prewired 115V
Belt Speed (SFPM): 2,500
Net Weight (lbs): 210
Open stand: 26'H x 15'D x 19-1/2'W

Features & Specs

• Amperage Capacity : 12.8 Amps
• Grit Number : 60
• Grit Type : Coarse
• Maximum Rotational Speed : 1725 RPM
• Power Source : Corded Electric
• Shape : rectangular
• Voltage : 115 Volts

Item details

• ASIN : B0000223MV
• Brand Name : Jet
• Global Trade Identification Number : 00662755147609
• Included Components : Belt/Disc Sander, Stand, Miter Gauge, Workstop, Lock Knobs (x2), Belt Tensioning Handle w/ Nut, Table Lock Handle, Abrasive Disc (60G), Abrasive Belt (60G), Manual, Hardware
• Item Type Name : Belt and Disc Sander
• Manufacturer : JET
• Manufacturer Part Number : 708599K
• Manufacturer Warranty Description : 5-Year Warranty (if used for commercial or industrial purposes then defaults to a 2-Year Warranty)
• Model Number : JSG-6DCK
• UPC : 662755637674 410050026439 662755147609
• Unit Count : 1.0 Count

Measurements

• Disc Diameter : 12 inches